12V 150AH 200AH 300AH Lifepo4 Battery 12V Lifepo4 Battery 150Ah 200Ah 300Ah 12V Lithium Iron Phosphate Battery for Motor

Please note: Due to higher than expected sales of 12V 150AH, 12V 200AH, and 12V 300AH batteries, purchasing these 150AH and 300AH batteries may take 2 months before they can be shipped from the German warehouse. We Apologize for Any Inconvenience Caused!

About "-Bluetooth" in the purchase options:
"-Bluetooth" means that the battery is equipped with a Bluetooth BMS (all batteries are built-in BMS), you can connect to the APP on the phone through this Bluetooth, you can check the working status of the battery and control the battery charging and discharging from the APP, thank you!

Technical Parameters

Rated voltage 12.8V
Rated capacity:150AH/200AH/300AH

Built in BMS (optional Bluetooth BMS)

1. Battery cell type: LiFePO4 battery
2. Weight:
150AH: about 12.5 kg
200AH: about 15.5 kg
300AH: about 22.5 kg

3. Size:
150AH/200AH: 360*305*170 mm
300AH: 415*340*175 mm
4. Nominal voltage: 12.8V
5. Operating voltage range: 10V~ 14.6V
6. Maximum charging current: 30A
7. Charging voltage: 14.6V
8. Continuous discharge current:
150AH≤ 120A
200AH≤ 150A
300AH≤ 200A
9 Instantaneous discharge current: ≤ 300A
10. Service life: more than 3000 cycles
11. Operating environment: 0 ~ 45℃ (charging), -20 ~ 60℃ (discharging)
12. Battery storage period: 90% power (6 months)
13. Battery warranty: 12 months (free warranty)

Interface Introduction

Note: ①③④⑤can be charged and discharged!

① Terminal (M8/M10)
150AH/200AH: M8; 300AH: M10
The M8/M10 terminal has a diameter of 8mm/10mm and can withstand a maximum current of 100A/150A.
Suitable for connection with 8mm/10mm diameter copper nose
It can also be used for charging.

③ Anderson plug (120A)
Anderson plug, which can be used for charging and discharging, can withstand a maximum current of 120A.

④ LD20(25A; L:+, N:-)
The connector can charge and discharge batteries, connect to low-power devices, and has a maximum current capacity of 25A.

⑤ Cigarette lighter (female socket)
The socket mainly supplies power to car appliances, such as car refrigerators, with a maximum current capacity of 20A.

② Battery power and voltage display
Display the voltage and remaining percentage of the battery.

Please note: The voltage display is not accurate when the battery is in charging or discharging state.The LiFePO4 battery's voltage is unstable, so the display's percentage of charge is not accurate.

Including 20A charger

Attention: As the charger is a consumable accessory, we only provide a three-month warranty for the charger. Thank you!

The red indicator light indicates that the charging is in progress, and the green indicator light indicates that the charging is completed.

1. Charging voltage: 14.6V
2. Charging current: 20A
3. Input voltage: 100v-240v
4. Charging time: about 9-17 hours

If you need a powerful Charger more than 20A, please contact us, thank you!

Attention: As the charger is a consumable accessory, we only provide a three-month warranty for the charger. Thank you!

Application

Boat propeller battery, Camper/scooter, golf trolley/carts, power tools...

Inverter, Solar and wind power system, RV, caravan...

Back-up system and UPS...

Torch LED light emergency light.

Battery cell type

Adopts large single high power LiFePO4 lithium battery. The current output is more stable and stronger.
LiFePO4 lithium battery have higher safety, longer service life and a wider operating temperature range.

Built-in BMS(optional bluetooth)

Our batteries are equipped with a BMS and an active equalizer.
(Bluetooth BMS can be selected in the purchase option)
The 12V150AH has a built-in 120A BMS.
The 12V200AH has a built-in 150A BMS.
The 12V300AH has a built-in 200A BMS.

Built in Bluetooth BMS (battery management system, functions)
1. over charge protection. 2. over current protection. 3. over voltage protection
4. discharge protection. 5. short circuit protection. 6. over power protection.
7. temperature protection.

About Bluetooth BMS features:
By connecting to the BMS of the battery through this APP, we can check the working status of the battery (battery voltage, current, voltage of each battery cell) on the APP, and also control the discharge and charging of the battery on the APP.

Please note:
The BMS image in the figure below is for reference only, we may change the BMS supplier, so the appearance of the BMS may be different.

Customized Service

If you need other connection plug, please contact us, thank you!

Introduction of manufacturer